產品分類
聯系我們
聯系人：肖先生
手 機：13549213581
電 話：0769-87795123
傳 真：0769-87795123
Q Q：15397858
在線客服(15397858)
內容編輯Perfluoropolymer 美國蘇威 MFA Hyflon® MFA D5220X塑料是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,UL黃卡,ROSH報告,reach報告,SVHC報告,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
13549213581 肖生
光澤高, 快速潤濕, 層壓板, 涂敷應用, 織物, 液體
Hyflon® MFA D5220X
Perfluoropolymer
Solvay Specialty Polymers
Technical Data
產品說明
Hyflon® MFA D5220X是一種Perfluoropolymer材料,。 該產品在北美洲、非洲和中東、拉丁美洲、歐洲或亞太地區有供貨,。 Hyflon® MFA
D5220X的主要特性為:高光澤度。
典型應用領域包括:
• 涂覆應用
• 紡織/纖維
總體
材料狀態 • 已商用：當前有效
資料 1 • Technical Datasheet
搜索 UL 黃卡 • Solvay Specialty Polymers
• Hyflon® MFA
供貨地區 • 北美洲 • 拉丁美洲 • 亞太地區
• 非洲和中東 • 歐洲
性能特點 • 光澤，高 • 快速潤濕
用途 • 層壓板 • 涂敷應用 • 織物
外觀 • 白色
形式 • 液體
物理性能 額定值單位制 測試方法
密度 1.41g/cm³ ASTM D4441
pH值 > 9.00 ASTM D4441
平均顆粒尺寸 180nm 內部方法
熱性能 額定值單位制 測試方法
熔融溫度 310°C ASTM D4591
充模分析 額定值單位制 測試方法
布絡克菲爾德粘度 (20°C) 20mPa•s ASTM D2196
補充信息 額定值單位制 測試方法
APFO Content 3 < 50ppm 內部方法
MFA Content 3 55.0wt% ASTM D4441
Non Ionic Surfactant 3 3.5wt% ASTM D4441
Processing
• Hyflon D5220X is processed according to methods generally used for conventional impregnation technology. Generally the procedure
involves dip-coating and then heating to remove water and surfactant from the impregnated item. Depending on the application, sintering
above the melting point of the coated resin may be carried out to obtain the finished coated articles.
• Hyflon D5220X can be processed neat or appropriately formulated. Also, it can be used diluted using distilled or deionized water.
Formulation, line speed and oven temperature must all be well controlled for optimized features of the coated substrates.
Storage and Handling
• Hyflon MFA dispersions must be stored under suitable temperature conditions to ensure prolonged stability. Temperatures lower than 5°C
must be avoided to prevent irreversible settling. Also, some settling may occur on prolonged standing and/or heat exposure. It is therefore
strongly recommended that the product is always kept at temperatures below 35°C. The optimum storage temperature range is 10 - 25°C. It
is also advisable that the product is homogenized by gentle rolling or stirring once per month and prior to use.
• Prolonged exposure of the liquid to air could lead to some coagulation at the surface due to water evaporation. For this reason and also to
avoid contamination, it is recommended to keep the containers closed when not in use.
Safety and Toxicology
• Before using Hyflon MFA dispersions consult the product Material Safety Data Sheet and follow all label directions and handling
precautions.
• As with all PTFE materials, handling and processing should only be carried out in well ventilated areas. Venting units should be installed
above processing equipment. Fumes must not be inhaled and eye and skin contact ought to be avoided. In case of skin contact wash with
soap and water. In case of eye contact flush with water immediately and seek medical help. Do not smoke in areas contaminated with
powder, vapour or fumes. See Material Safety Data Sheet for detailed advice on waste disposal methods.
Packaging
• Hyflon D5220X is packaged in either 25 kg drums or 1500 kg IBC's.
Hyflon® MFA D5220X
Perfluoropolymer
Solvay Specialty Polymers
備注
1 通過這些鏈接您能夠訪問供應商資料。我們盡量保證及時更新資料；不過您可以從供應商處了解最新資料。
2 一般屬性：這些不能被視為規格。
3 on the mixture
Perfluoropolymer 美國蘇威 MFA Hyflon® MFA D5220X塑料是東莞市雙幫塑膠原料有限公司常年銷售的塑料，因為塑料價格行情每天都有新變化前天的報價不等于今天的報價。本公司銷售的所有原料保證是原廠原包,隨料可以提供生產廠商提供的物性表、SGS報告，COA原料出廠報告,UL黃卡,ROSH報告,reach報告,SVHC報告,提供原料注塑加工工程中可能出現的各種異常現象解決方法，塑料牌號太多，本網站沒有提供的本公司也有代理，詳情請咨詢本公司相關業務人員0769-87795123
13549213581 肖生