久久www免费人成看片爱潮|婷婷av在线|国产对白不带套毛片av|亚洲色图21p|久久久www免费电影网

PTFE DW201價格

 

DeWAL D/W 201
聚四氟乙烯
DeWAL Industries

產品說明

DW 201 is skived from a modified homopolymer PTFE (Dupont NXT70)resin containing a higher level of a fully fluorinated comonomer. The incorporation of the comonomer yields a materail with improved electrical and physical properties. This film can be thermally bonded (fused) to itself (625 - 650 degrees F). The modified homopolymer resin exhbits chemical resistance equivalent to that of homopolymer PTFE. Its tensile strength is approximately 25% higher, and the elongation is approximately 60% higher than for homopolymer PTFE. Because of these properties DW 201 is often a good substitute for melt processable films such as PFA. Product can be supplied etched for bonding.

DW 201 may be thermally fused to itself making possible the fabrication of structures used in medical applications, as well as other products fabricated by thermally welding of films together. DW 201 can also be used as a high dieclectric strength fusible wrap in electrical and electronic cable applications. It can be used as a bonding film in the ciruit board industry.

總體

材料狀態 • 已商用：當前有效   
供貨地區 • 北美洲 • 歐洲  
性能特點 • 均聚物 • 良好的電氣性能 • 耐化學性良好 
用途 • 薄膜 • 電子電纜護套材料 • 粘合 
 • 電氣/電子應用領域 • 醫療/護理領域的應用  
    
形式 • 薄膜   

物理性能 額定值單位制 
Thickness 12.7 到 1020nm 
薄膜 額定值單位制 測試方法
抗張強度 - MD (屈服) 41.4MPa ASTM D882
伸長率 - MD (斷裂) 500% ASTM D882
熱性能 額定值單位制 
最高連續使用溫度 260°C 
電氣性能 額定值單位制 測試方法
介電強度 110kV/mm ASTM D149
補充信息 額定值單位制 
Backing Material PTFE Film 
Core ID 7.62cm 
Maximum Roll OD 356mm 
Width 6.35 到 1270mm 

備注
1 一般屬性：這些不能被視為規格。

 

 

 

 

 

 

 

 

 

 

 

1 / 1