久久www免费人成看片爱潮|婷婷av在线|国产对白不带套毛片av|亚洲色图21p|久久久www免费电影网

etfe 750電器導線絕緣材料, 電線電纜應用etfe

 

Tefzel 750
乙烯四氟乙烯共聚物
DuPont Fluoropolymers

產品說明

DuPont™ Tefzel ® fluoropolymer resins offer mechanical strength and toughness along with resistance to heat and chemicals. In addition, they provide easy processing, high specific dielectric strength, and a low coefficient of friction. For these reasons, Tefzel ® resins are widely used to make compact wire and cable constructions that provide long, reliable service in demanding environments.

Tefzel ® 750 retains the traditional characteristics of Tefzel ® resins while providing some new property advantages, including increased flexibility and improved retention of properties after aging at elevated temperatures, higher limiting oxygen index, and long-term service life at higher temperatures than other Tefzel ® resins.

Underwriters Laboratories, Inc. (UL) has rated wire insulated with Tefzel ® 750 (10 mil for 600V, 6 mil for 300V) for service in appliances at a maximum continuous operating temperature of 200°C (392°F). This rating was determined under the guidelines of UL Subject 758 for appliance wiring material. Upper service temperatures for other applications should be determined under the guidelines for those applications. Temperature ratings may not be the same as the rating for appliance wire because the test procedures are different.

總體

材料狀態 • 已商用：當前有效   
供貨地區 • 北美洲 • 歐洲  
 • 南美洲 • 亞太地區  
    
性能特點 • 低摩擦系數 • 良好的柔韌性 • 耐熱性，高 
 • 可加工性，良好 • 耐化學性良好 • 韌性良好 
    
用途 • 電器導線絕緣材料 • 電線電纜應用  
形式 • 顆粒料   
加工方法 • 擠出   
    
物理性能  額定值單位制 測試方法 
比重  1.77g/cm³ ASTM D792 
熔流率 (297°C/5.0 kg)  7.0g/10 min ASTM D1238 
機械性能  額定值單位制 測試方法 
抗張強度   ASTM D638 
23°C  37.9MPa  
140°C  11.4MPa  
160°C  8.62MPa  
180°C  6.21MPa  
200°C  3.45MPa  
伸長率   ASTM D638 
斷裂, 23°C  300%  
斷裂, 140°C  600%  
斷裂, 160°C  650%  
斷裂, 180°C  600%  
斷裂, 200°C  600%  
彎曲模量  645MPa ASTM D790 
熱性能  額定值單位制  
熔融溫度  219 到 254°C  
可燃性  額定值單位制 測試方法 
極限氧指數  34% ASTM D2863 
補充信息    

The values listed as Tensile Strength, ASTM D638, and Tensile Elongation @ Brk, ASTM D638, were tested in accordance with ASTM D1708. Specific Gravity, ASTM D792: 1.75 to 1.79 sp gr 23/23°C

MIT Flex Life: 120000

擠出 額定值單位制
第1氣缸區溫度 288°C
第2氣缸區溫度 316°C
第3氣缸區溫度 321°C
連接器溫度 321°C
熔體溫度 332 到 335°C
模具溫度 332°C